+607-5584286 / 017-3116146 oshcim.isi@gmail.com

OSHCIM Professional Competency Training Course

23-25 May 2023

Universiti Teknologi Malaysia, Johor Bahru, Johor

Register Now

Introduction

New Amended OSHA, highlighted one of the obligations is to conduct a risk analysis. OSHCIM guidelines outline the minimum responsibilities of all duty holders and stakeholders participating in the construction project from its inception to its conclusion. Among the duty holders listed are the client, designer, and contractor. It is their responsibility to adhere to this practical advice on the management of safety, health, and welfare throughout the life cycle of a building.

To equip the industry with relevant competencies to effectively implement OSHCIM Guidelines, BIMCDIS introduced the competency programme to ensure the designers are competent to implement OSHCIM in the construction industry. This training has been developed through a government initiative by the
Department of Occupational Safety and Health Malaysia (DOSH).

Objectives

Upon completion of the 3-day course, learners are expected to have the skills and
knowledge to function as competent designers with the purpose to:

\

Assist the client to facilitate an OSHCIM design review assessment with stakeholders to address and identify means to eliminate or mitigate the risks inherent in the design of a construction project so as to reduce the safety and health risks during the construction, maintenance/repair phase, and demolition of the building and structure. 

\

Coordinate the flow of construction
project safety and health risk information among the stakeholders from the design stage to the construction stage until the handover to the client for occupation and maintenance.

Who Should Attend

  • Developer
  • Designer
  • Consultant
  • Architects
  • Contractor
  • Enforcers
  • M&E Engineers
  • Civil Engineers
  • Project Managers
  • OSH Practitioners
  • Project Engineers
  • Quantity Surveyors
  • All Project Design Team Members

Preconditions

The eligibility requirements for this course include:

  • Must be a registered member with a Professional Board i.e., Board of Architects Malaysia (LAM), Construction Industry Development Board (CIDB), Board of Quantity Surveyors Malaysia (BQSM), etc.  OR
  • degree accepted by the Malaysian Qualification Agency (MQA), AND
  • 3 years of relevant construction project experience.

Every registration will go through internal screening before being approved to join the course.

Course Synopsis

This course is designed to ensure that Occupational Safety and Health in Construction Industry (Management) – (OSHCIM) concepts can be practiced at an early stage of a project. Design Phase is the earliest opportunity to incorporate Safety into a construction project. Just as productivity can be enhanced with early planning, so is the greatest impact for safety. Designing for safety starts at the conceptual and planning phases of a project with collective and conscious decisions by stakeholders about the design, methods of construction and later demolition, and also the materials used which enhance the safety of the building or structure.

Course Modules

SESSION 1

Construction Project Management & Contract

SESSION 4

Risk Reduction through OSHCIM

SESSION 7

Design Review Assessment 3

SESSION 2

Designer Liability

SESSION 5

Design Review Assessment 1

SESSION 8

Technology for OSHCIM

SESSION 3

OSHCIM Documents

SESSION 6

Design Review Assessment 2

l

Individual Assessment

OSHCIM competency exam

Course Duration

3 days : Physical Class

The participant will attend the physical course at Johor Bahru

4 months: Individual work-based Project Assignment & Final Presentation

Each participant is required to complete his project assignment within three months for assessment prior to the final presentation to the panel.

Certificates

  • OSHCIM Certificate of Attendance
  • OSHCIM Certificate of Completion (Upon passing paper 1 exam)
  • OSHCIM Professional Certificate (Upon passing paper 2 project assessment)

Continuing Professional Development Points

  • LAM – 3
  • DOSH – 10
  • CIDB – applied
  • MIP – applied
  • BQSM – applied
  • BEM – applied
  • MBOT – applied
  • ILAM – applied

Speakers

Prof. Dr. Kherun Nita binti Ali

Prof. Dr. Kherun Nita binti Ali

Areas: Building Information Modelling,  Digital Construction, Information Technology in Construction

Prof. Dr. Mohammad Ismail

Prof. Dr. Mohammad Ismail

Areas: Concrete Durability, Corrosion of Reinforcement, NDT & Structural Forensic Engineering, Sustainable Construction Materials and Environmental Engineering

Assoc. Prof. Dr. Nur Emma Mustaffa

Assoc. Prof. Dr. Nur Emma Mustaffa

Areas: Construction Contract, Dispute Resolution, Procurement, Legal Aspects in Building Information Modelling

Dr. Kamarizam kidam

Dr. Kamarizam kidam

Areas: Process Safety, Occupational Safety and Health, Prevention through Design, Vision Zero, Commuting

Assoc. Prof. Dr. Jafri Mohad Rohani

Assoc. Prof. Dr. Jafri Mohad Rohani

Areas: Quality Engineering, Six Sigma, Quality Management, Ergonomics, Construction Safety, Occupational Safety and Health

Ar. IDr. Ts. Samsiah Abdullah

Areas: Safe by Design : OSHCIM,
Modular Coordination Green Architecture,
Sustainable Affordable Housing

Dr. Hamizah Liyana Tajul Ariffin

Dr. Hamizah Liyana Tajul Ariffin

Areas: Construction Contract, Construction Procurement, Disputes Minimisation, Research Methodology

Dr. Norhazren Izatie Mohd

Dr. Norhazren Izatie Mohd

Areas: Information Technology in Construction, Building Information Modelling, Quantity Surveying Practice, Construction Contract, Construction Safety, Adult training, Facilities Management, Maintenance Management, Gamification

Ir. Dr. Noor Nabilah Sarbini

Ir. Dr. Noor Nabilah Sarbini

Areas: Fibre Reinforced Concrete, Pre-stressed & Precast Concrete, Bridge Design & Construction, Forensic Engineering, Building Condition Assessment, Structural Assessment.

Dr. Hamidah Kamardeen

Dr. Hamidah Kamardeen

Areas: Occupational Safety and Health (OSH), Process Safety and Loss Prevention in Process Industry, Environmental Engineering, Health, Safety & Environment, Process Development and Plant Design

Ms. Siti Shuhaili Shahlan

Ms. Siti Shuhaili Shahlan

Areas: Occupational Safety and Health in
Construction Industry (Management)
(OSHCIM), Occupational Safety and Health Management Systems Risk Reduction, Process Safety and Loss Prevention, Learning from Accident

Training Methodology

Participants will gain essential knowledge and skills through:

Theory Session

  • Dynamic and highly engaging presentation
  • Interactive and fun
  • Attention-grabbing audio-visual aids, real-scene photographs, video clips and multimedia presentations.
  • Workshop Coordination

Exam and Assessment

Participants are required to complete an assessment session

Transferable skills

Generic skills leraned in the course of study which can be useful and utilised in other settings:

  • Problem-solving skills
Paper 1 Exam

Participants are required to complete Paper 1 Exam at the end of the training course.

  • Objective – 20 questions
  • Subjective  – 10 questions
  • Essay – 1 question

Participants must score at least 80% for Paper 1.

Paper 2: Work-based Project Assignment

To be completed outside of the course schedule and submitted within 3 months upon completion of classroom training.

Participants must score at least 75% for Paper 2. This is an individual project to be completed outside the course schedule.

Paper 2: Presentation

A 30-minute presentation. The date will be fixed after the trainer has completed viewing the report. The project must be submitted in full (hard and soft copies).

Fees

NORMAL RATE

RM3500

Fee does not include CPD Processing Fee

* This OSHCIM Professional Competency Training course is recognised by selected professional bodies to claim CPD points. Therefore, for participants who wish to claim CPD points from the relevant professional bodies, there is an additional processing fee for the CPD points claimed.

LAM: RM200.00/LAM CPD claim
Others: RM30.00/CPD provider

What’s included in the fee:

  • 3-day training class (face to face)
  • Training kit bag during physical class (course material and goodies)
  • Refreshment during physical class
  • WBPA Report Materials
  • Support Group for discussion
  • Exam & Assessment for Paper 1 and Paper 2
  • Certificate (Certificate will be awarded upon successful completion of the 3-day course and pass Paper 1 & 2 exams).

Registration Now Open

Documents for Registration

  1. Registration Number with a professional board (membership certification).
  2. Copy of Bachelor’s Degree Certification
  3. Employer Declaration Letter (as proof that you have at least three (3) years of working experience in the construction project)
  4. Curriculum Vitae

Every registration will go through internal screening before being approved to join the course.

Registration Dealine

Please register no later than 14 May 2023.
The last day for payment is 20 May 2023

How to make a payment?

Please make your payment by Cheque / Online Transfer / Bank-In / Local Order* to the following account:

—————————————————

Payable To      :  Institut Sultan Iskandar

Bank                 :  CIMB Bank Berhad

Account No     :  80-0605659-9

Branch              :  UTM, Skudai

Bank Address  :  Bangunan Hal Ehwal Pelajar, Universiti Teknologi Malaysia, 81300, Skudai, Johor.

SWIFT Code     :  CIBBMYKL

Get in touch